MX400D DRIVER DOWNLOAD

Place the microphone cartridge within 15 to 30 cm 6 to 12 in. Mic is active when powered on. All images and descriptions are for illustrative purposes only. Provides 30 dB of “pop” protection. The desktop base allows these microphones to be used in multi-purpose rooms where quick set-up is required, or where permanent installation is impractical. Eligible for CE marking. Access the circuit board inside the microphone base.

Uploader: Vozil
Date Added: 24 April 2011
File Size: 47.86 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 4695
Price: Free* [*Free Regsitration Required]

Products may not be available in all markets. Place the microphone cartridge within 15 to 30 cm 6 to 12 in.

The names and logos of third party products and companies shown on our website and used in the materials are the property of their respective owners and may also be trademarks.

Bottom m4x00d must be closed for microphone to function. Although we endeavor to present the most precise and comprehensive information at the time of publication, a small number of items may contain typography or photography errors. Provides TTL logic high 5 Vdc otherwise.

Interchangeable cartridges provide the right polar pattern for any application. Complain wrong Brand wrong Model non readable. Audio and logic ground are connected at microphone base.

New Drivers  GECUBE ATI 9550 DRIVER

Any rights not expressly granted herein are reserved. Mx40d remove the windscreen, spread the slot in its mounting ring with a screwdriver or thumbnail and pull the windscreen off carefully. Use these settings if connecting the microphone to an automatic mixer or other device that mutes audio and controls the LED.

Certifications Meets essential requirements of all applicable European Directives. Remove the resistor at R45 and reinstall it at location R Microphone Placement Aim the microphone toward the desired source, such as the talker. If four or more microphones will be open at the same time, use of an automatic mixer, such as the Shure SCM or SCM, is recommended.

MX microphones are available with mm 12 in.

General Description

Provides a TTL logic low 0 Vdc when the membrane mmx400d is pressed. Desktop Microphones User Guide. This disbles the mute button the microphone passes audio regardless of whether the button is pressed or not. Set DIP switch 3 on. To remove the windscreen, spread the slot in its mounting ring.

SHURE MICROFLEX MXD USER MANUAL Pdf Download.

Install two screws, Recommended for general sound reinforcement ap- plications. Aim it away from any unwanted source, such as a loudspeaker.

To gain access to the DIP switches, remove the bottom plate. If four or more microphones will be on at the same time, use of an automatic mixer, such as the Shure SCM or FP, is recommended to minimize feedback and noise.

New Drivers  CYBER-SHOT DSC-T77 DRIVER DOWNLOAD

Always use the supplied windscreen or the optional metal. Always use the supplied windscreen or the optional metal windscreen to control breath noise. The Switch Out function provides momentary closure when S1 is Off and latching closure when it is On. Press the foam windscreen onto the microphone until it snaps into the groove located below the cartridge.

New brighter LED improves visibility under strong ambient lighting.

Shure MX400D User Manual

Please consult the product specifications page for full details. Desktop base allows microphones to be used in multi-purpose rooms where quick setup is required, or where permanent installation is impractical. Installing the Foam Windscreen Figure 2 on page Connect logic leads to the automatic mixer.

Microflex microphones use interchangeable cartridges that allow you to choose the polar pattern for different installations.